11 Memory Modules - HP Compaq Mini 110c-1001 User Manual

Hp compaq mini 110c-1001: user guide
Hide thumbs Also See for Compaq Mini 110c-1001:
Table of Contents

Advertisement

11 Memory modules

The computer has one memory module compartment, which is located on the bottom of the computer,
beneath the vanity cover. The memory capacity of the computer can be upgraded by replacing the
existing memory module in the memory module slot.
WARNING!
and remove all batteries before installing a memory module.
CAUTION:
procedure, ensure that you are discharged of static electricity by touching a grounded metal object.
To add or replace a memory module:
1.
Save your work.
2.
Shut down the computer and close the display.
If you are not sure whether the computer is off or in Hibernation, turn the computer on by sliding
the power switch. Then shut down the computer through the operating system.
3.
Disconnect all external devices connected to the computer.
4.
Follow the instructions in the section "Removing the vanity cover," earlier in this guide.
5.
Remove the existing memory module:
a.
Pull away the retention clips (1) on each side of the memory module.
The memory module tilts up.
CAUTION:
edges only. Do not touch the components on the memory module.
70
Chapter 11 Memory modules
To reduce the risk of electric shock and damage to the equipment, unplug the power cord
Electrostatic discharge (ESD) can damage electronic components. Before beginning any
To prevent damage to the memory module, hold the memory module by the

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Compaq mini 110c-1040Compaq mini 110c-1100Compaq mini 110c-1105Mini 100eMini 110Mini 110-1026 ... Show all

Table of Contents