Primary Memory Module - HP Compaq 6730b Maintenance And Service Manual

Primary memory module

Description
2048-MB memory module (PC2-6400, 667-MHz, DDR2)
1024-MB memory module (PC2-6400, 667-MHz, DDR2)
Before removing the primary memory module, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC Adapter from the computer.
4. Remove the battery (see
5. Remove the keyboard (see
Remove the primary memory module:
1. Spread the retaining tabs (1) on each side of the memory module slot to release the memory
module. (The edge of the module opposite the slot rises away from the computer.)
2. Remove the memory module (2) by pulling the module away from the slot at an angle.
NOTE:
memory module slot.
3. Remove the memory module.
Reverse this procedure to install the primary memory module.
Battery on page
Keyboard on page
Memory modules are designed with a notch (3) to prevent incorrect insertion into the
46).
60).
Component replacement procedures
Spare part number
483194-001
483193-001
63