Table of Contents
Advertisement
Soffit for DCS-IVH-36 Island Vent Hood
THE DIMENSIONS GIVEN ARE FOR A 1/2 INCH DRYWALL.
1) Create a soffit structure and attach the soffit brackets as in fig-
ure 1A. Refer to the installation guidelines on Page 6.
2) Attach the soffit support bars as shown in figure 2A.
3) After securing the soffit structure adequately to the ceiling joist,
attach the Island Vent Hood with the mounting screws provided,
figure 3A.
Refer to page 6 on finishing the installation.
Create your Soffit Struct
first and attach Soffit B
to each side with screws pr
SOFFIT ASSEMBLY
FOR 36" ISLAND VENT HOOD
SUPPORT
HEIGHT WILL
VARY
BARS
ACCORDING
TO CEILING
HEIGHT
16 3/4 "
The dimensions given
are for a 1/2 " drywa
All manuals and user guides at all-guides.com
FIG.1A
s
kets
ided
FIG.2A
10 3/4 "
7
CREATE YOUR
SOFFIT STRUCTURE
ACCORDING TO THE
CEILING HEIGHT
THEN ATTACH IT
TO THE CEILING JOIST.
SCREWED TO BOTH SIDES
36" ISLAND VENT HOOD SOFFIT MOUN
Soffit Installation
FIG.3A
SCREW SUPPORT BARS
ON BOTH SIDES AS SHOWN
SOFFIT BRACKETS
OF SOFFIT STRUCTURE
6 Mounting Screws
843 fig 1
Advertisement
Table of Contents
