Features - Sony DWTP01N/14 Operating Instructions Manual

Features

The DWT-P01N is a digital wireless transmitter for a UHF
synthesized wireless microphone system to be used for
broadcast or movie production purpose. This transmitter is
suitable for Electronic News Gathering (ENG).
What is DWX?
DWX refers to Sony's new digital wireless microphone
system. The DWX series reflects Sony's extensive
expertise in professional microphones and sound design. It
represents a successful blend of Sony know-how, wireless
technology renowned for stability, and cutting-edge digital
audio technology.
In addition to realizing the high sound quality possible
with a digital system, the DWX series supports multi-
channel simultaneous operation, encrypted transmission,
and metadata transmission for monitoring the status of
multiple transmitters. Using a main link and a separate
additional link, remote control of transmitters from the
receiver is also possible. With its many advanced features,
the system has the potential to revolutionize the workflow
of professional applications.
What is WiDIF-HP?
WiDIF-HP (WiDIF: Wireless Digital Interface Format,
HP: High Profile) is a wireless digital audio interface
format developed by Sony.
It enables highly secure transmission with high sound
quality and low system latency, and supports simultaneous
multi-channel operation.
What is Cross Remote?
Cross Remote is a system that allows transmitters to be
monitored and controlled from a receiver and the Wireless
Studio control software installed on a computer connected
to the receiver.
For example, the settings of a transmitter worn under
clothing can be easily changed over the wireless link.
Wide RF carrier frequency range
The DWT-P01N transmitter covers an extremely wide RF
carrier frequency range. Depending on the model, the
transmitter can cover bandwidths between 42-MHz and
72-MHz (e.g., 72-MHz with the 42CE
than 24-MHz of the analog wireless microphone system.
This remarkably wide coverage on a single model offers
cost efficiency and operational convenience, because it
allows one transmitter to be operated in many different
areas.
1)
Carrier frequencies differ depending on the model.
Switchable mic or line input level and
adjustable attenuator
For details, see "Setting the audio input level (INPUT
LEVEL)" on page 12.
Three audio codec modes
Switch between audio codec modes based on your
operational needs.
For details, see "Setting the audio codec mode (CODEC
MODE)" on page 13.
Switchable RF output power
For details, see "Setting the RF output power (RF
POWER)" on page 11 and "Setting the maximum RF
output power (MAX RF POWER)" on page 13.
Power sleep mode
For details, see "Power save setting (POWER SAVE)" on
page 12.
Digital low-cut filter
For details, see "Low-cut filter setting (LCF)" on page 12.
Easy-to-see, full dot-matrix OLED (Organic
Light-Emitting Diode) Display
The quick response of the OLED display enables real-time
operating conditions to be displayed clearly and
accurately.
+48 V power supply for a microphone
For details, see "+48 V power supply setting (+48V)" on
page 13.
1)
) — much wider
3