Nortek Control Mighty Mule MM571W Installation Manual page 26

FACING VIEW
Step 3
Using appropriate hardware for your type of gate, attach the vertical closed position stop plate to the SECOND gate frame at the
point where it will come in contact with the low profile ground stop. Do not tighten it completely at this time. You must slide the
closed position stop plate toward the low profile ground stop until they touch. Once you have moved the stop plate to the correct
position, tighten its hardware completely.
Step 4
Return the gates to their open positions and reattach the gate openers to the gates.
MM571W / MM572W Installation Instructions
Closed Position Stop Plate mounted
on the SECOND GATE
Low Pro le Ground Stop
Closed Position
Stop Plate
SIDE VIEW
• •• • •• •• • • •••• • •• •• • •• •• ••
• • • •• •• •••• Ground Stop
•• •• •• •••• ••• •• ••••• ••• ••••• • •
Closed Position
Stop Plate
23