Table Of Contents; Introduction - Zenith ZN551 Manual

Table of Contents

Introduction .................................................................. 2
Setup ............................................................................. 4
Battery Installation ..................................................... 4
Battery Saver ............................................................. 4
Code Saver ............................................................... 4
Power-On default ...................................................... 5
TV Punch Through ..................................................... 5
VCR Punch Through .................................................. 5
Code Setup ............................................................... 5
Button Functions ............................................................. 6
Advanced DVD and SAT Button Functions ..................... 8
TV/VCR Punch-Through ................................................ 9
TV/VCR and TV/DVD Combo units .............................. 9
Code Entry ................................................................... 10
Direct Code Entry .................................................... 10
Code Search ........................................................... 11
Code Identification ................................................... 12
Sleep Timer .................................................................. 13
Code Learning .............................................................. 13
Tips on Learning ...................................................... 14
Learning Commands ................................................ 14
Clearing Learned commands for a mode ................... 15
Master Clear ........................................................... 15
Code List ..................................................................... 16
Product Operation ........................................................ 22
Wireless Receiver ......................................................... 23
Troubleshooting ............................................................ 23

Introduction

Congratulations on your purchase of a Zenith Universal Remote
Control. Zenith Universal Remotes let you replace a broken or lost
remote or combine more than one remote into one. In addition, this
remote is equipped with a command learning feature which lets the
remote learn commands from your original equipment remote
control!
This remote control operates the common features of most but not
all models and brands of IR Infrared Controlled Video Equipment.
This remote may provide functions that are not available on your
equipment. Some functions of your particular equipment (e.g.
menu functions) may not be controlled by this remote.
2
In such cases, use the original remote control for your equipment.
Please use this manual to become familiar with your Zenith
Universal Remote. After you are familiar with your remote the first
thing you need to do is to install batteries and setup your remote
for your particular product and brand.
The remote also transmits wireless radio Frequency (RF) com-
mands. The wireless receiver (included) receives these commands
and converts them to regular Infrared (IR) commands. These IR
commands are then emitted from the IR Extender (also included) to
control your A/V components. This lets you control your A/V
components from ANY room in your home - you don't need to aim
the remote at your component!
Thank you for buying a Zenith remote and we hope it will give you
many years of service.
FCC Caution
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC
RULES. OPERATION IS SUBJECT TO THE FOLLOWING
TWO CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFER-
ENCE, AND
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE
RECEIVED, INCLUDING INTERFERENCE THAT MAY
CAUSE UNDESIRED OPERATION.
This equipment generates and uses radio frequency energy, and if
not installed and used properly, that is, in strict accordance with the
manufacturers instructions, it may cause interference to radio and
television reception. It has been type tested and found to comply
with the limits for remote control devices in accordance with the
specifications in Sub-Parts B and C of Part 15 of FCC Rules,
which are designed to provide reasonable protection against such
interference in a residential installation. However, there is no
guarantee that interference will not occur in a particular installa-
tion. If this equipment does cause interference to radio or television
reception, which can be determined by unplugging the equipment,
try to correct the interference by one or more of the following
measures.
• Reorient the antenna of the radio/TV experiencing the interfer-
ence.
• Relocate the interface with respect to the radio/TV.
• Move the interface away from the radio/TV.
• Plug the interface into an outlet on a different electrical circuit
from the radio/TV
experiencing the interference.
• If necessary, consult your local Dealer for additional suggestions.
NOTE: Modifications to any of the components in this kit will void
the user's authority to operate this equipment.
3