HP Compaq 2230s Maintenance And Service Manual page 62

c. Lift the inside edge of the top side of the bezel 1 to disengage it from the clips, and then lift the left and
right sides 2 until the bezel disengages from the display enclosure.
d. Remove the display bezel 3. The display bezel is available using spare part number 495015-001.
Reverse this procedure to install the display bezel. Be careful to route the cables through the side openings in
the hinge covers and avoid pinching the cables between the bezel and display enclosure.
2. If it is necessary to remove the webcam module:
a. Disconnect the webcam cable 1 from the computer.
b. Remove the webcam module 2 from the display enclosure. (The webcam is secured with
double-sided tape.) The webcam can also be ordered separately and is available using spare part number
492159-001.
Removal and replacement procedures 4–28