Connect Nvr To Display - Q-See QTN8086B Quick Start Manual

C. Plug the other end of the camera cable into an
available PoE port on the back of your NVR. Again,
you will hear a clicking noise when cables are inserted
correctly. Repeat steps A through C for each camera.
NOTE: Channels are assigned to cameras in the order they
are connected. Port numbers do not indicate the channel that
will be assigned to the camera.
6
Step 3: Connect NVR to Display
There are two options to connect the NVR to a display.
Option A: HDMI
A1. Plug the included HDMI cable into the NVR's HDMI port.
A2. Connect the other end of the HDMI cable to the
monitor or TV.
A3. Plug the monitor or TV into a surge protector.