Initializing Network Settings - Canon PIXMA MG3660 Online Manual

Initializing Network Settings

Important
• Note that initialization erases all network settings on the machine, and printing or scanning operation
from a computer over network becomes impossible. To use the machine over network, perform setup
according to the instructions on the Canon website.
1. Start up IJ Network Tool.
2. Select printer in Printers:.
3. Select Maintenance... on Settings menu.
1. Setting Initialization
Initialize
Returns all the network settings of the printer to factory default.
4. Click Initialize.
The Setting Initialization screen is displayed.
Click OK to initialize the network settings of the printer. Do not turn off the printer during initialization.
Click OK when initialization is complete.
Performing initialization when connected over wireless LAN will break the connection, so perform setup
according to the instructions on the Canon website.
Note
• You can change the network settings of the printer using IJ Network Tool with USB connection after
initializing the LAN settings. To change the network settings using Canon IJ Network Tool, enable
wireless LAN in advance.
232