Setting The Ink Cartridge To Be Used - Canon PIXMA MG3660 Online Manual

Setting the Ink Cartridge to be Used

This feature enables you to specify the most appropriate FINE cartridge among installed cartridges
according to an intended use.
When one of the FINE cartridges becomes empty and cannot be replaced immediately by a new one, you
can specify the other FINE cartridge that still has ink and continue printing.
The procedure for specifying the FINE cartridge is as follows:
1. Select Ink Cartridge Settings from the pop-up menu on the
2. Select the FINE cartridge to be used
Select the FINE cartridge you use for printing, and click Apply.
Color Only
Uses the color ink cartridge only.
Black Only
Uses the black ink cartridge only.
Both Black and Color
Uses the color and black ink cartridges installed on the printer.
3. Complete the setup
Click OK when the confirmation message appears.
The specified FINE cartridge will be used from the next printing.
Important
• When the following settings are specified, Black Only does not function because the printer uses the
color FINE cartridge to print documents.
• A paper type other than Plain Paper, Envelope, Ink Jet Hagaki (A), Hagaki K (A), Hagaki (A), or
Hagaki is selected from the Media Type of the Quality & Media on the pop-up menu in the Print
dialog.
• "XXX (borderless)" is selected from the Paper Size pop-up menu in the Print dialog.
• Do not detach the FINE cartridge that is not in use. Printing cannot be performed while either FINE
cartridge is detached.
Canon IJ Printer Utility
191