Cisco Aironet 1520 Series Hardware Installation Manual page 49

Chapter 2 Mounting Instructions
R E V I E W D R A F T — C I S C O C O N F I D E N T I A L
Screw a M8 x16 bolt in the top support bolt hole on each side the access point (see
Step 3
screw the bolt all the way in; leave approximately a 0.25 in. (0.635 cm) space.
Figure 2-7
Ground lug location
1
M8 x16 bolt
2
(supplied with pole mount kit)
OL-12632-03
Location of Access Point Top Support Bolt Hole
Cisco Aironet 1520 Series Outdoor Mesh Access Point Hardware Installation Guide
Second bolt hole location
3
Mounting the Access Point
Figure 2-7). Do not
2-19