Cisco Aironet 1520 Series Hardware Installation Manual page 16

Hardware Features
R E V I E W D R A F T — C I S C O C O N F I D E N T I A L
Hardware Features
This section describes the hardware features of the access point.
show the access point connectors.
The illustrations in this document show all available connections for the access point. Unused
Note
connections are capped with a connector plug to ensure the access point's watertight integrity. Liquid
tight adapters are provided for connector openings, which can be installed before or after deploying the
access point. The illustrations do not show antenna port 5, which is reserved for future use.
Figure 1-1
1
2
3
4
1. Only one power source is usually configured.
2. PoE = Power over Ethernet
3. Antenna locations depend upon access point configuration (see the
Cisco Aironet 1520 Series Outdoor Mesh Access Point Hardware Installation Guide
1-2
Access Point Bottom Connectors
1
AC power connector (optional)
Reserved for future use
3
Antenna connector (Type N)
Alternate fiber-optic connector location
(optional)
Figure 1-1, Figure
2
PoE-Out connector
5
LEDs
6
3
Antenna connector (Type N)
7
1, 2
PoE-In connector
8
"Antenna Connector Locations" section on page
Chapter 1 Overview
1-2, and Figure 1-3
1-5).
OL-12632-03