JVC GY-HM180U Instructions Manual page 38

Symptom
Incorrect display on the
viewfinder.
The actual recording time is
shorter than the estimated
time.
Cannot connect to wireless
LAN. n
The View Remote screen turns
black.
The screen flickers.
The screen freezes.
Cannot perform remote
operation. n
The clips cannot be uploaded
to the FTP server. n
The wireless LAN is
disconnected. n
The images and audio sound
during live streaming are
choppy. n
38
Troubleshooting
Is [LCD/VF] B [VF SW] set to "Enable", and is the viewfinder in use
0
without being pulled out?
To use the viewfinder in this setting, pull out the viewfinder.
The recordable time may be shorter depending on the shooting
0
conditions or the subject.
Check the mode of connection and method of setting ([SSID] and
0
[Passphrase] in cases other than WPS).
Even if the Passphrase is wrong, "Completed the Setup Wizard.
0
Please Input the Passphrase into Your Device." may appear at the
browser setting depending on the type of encryption.
Adjust [Passphrase] again.
The network path is congested.
0
Wait a while before refreshing (reloading) the web browser.
Adjust the [Clip Server] settings.
0
The maximum size of the recorded clip is 64 GB.
0
If a file size limit is set in the FTP server settings, set the size limit to
more than 64 GB.
The wireless LAN may be disconnected depending on the
0
environment. Change the usage environment.
Connect via wired LAN.
0
Depending on the type of network adapter used and the connection,
0
streaming may not be possible with the encoding bit rate specified.
Please reduce the encoding bit rate.
Action