Usable Cards - JVC GY-HM180U Instructions Manual

4 Press the Set button (R) after confirming
the exit screen.
The [Initial Setting] screen appears.
For U models
0
Initial Setting
UTC-05:00
.
For E models
0
Initial Setting
UTC
.
Memo :
The [Initial Setting] screen appears when the
0
power is turned on for the first time and when the
power is turned on after the built-in battery is fully
discharged.
The configured date/time data is saved in the
0
built-in rechargeable battery even if the power is
turned off.
5 Set the time zone and date/time.
A Move the cursor with the cross-shaped button
(HI) and select the setting item.
B Change the values with the cross-shaped
button (JK).
6 Press the Set button (R) after setting is
complete.
The clock is set to 0 seconds of the input date/
time.
Memo :
The configured date/time data can be displayed
0
on the LCD monitor and viewfinder and be
recorded to the SD card.
The value of the year can be set in the range of
0
"2000" to "2099".
18
Configuring the Initial Settings

Usable Cards

Format Setting and Usable SD Card
Combinations
System
High-
Speed
4K
Set
HD
SD
Web
Caution :
Set
0
0
Format
QuickTime 50M (XHQ)
35M (UHQ)
150M
70M
50M (YUV422),
50M (XHQ)
35M (UHQ)
AVCHD -
Exchange* -
- -
- -
Using cards other than those from Panasonic,
TOSHIBA or SanDisk may result in recording
failure or data loss.
If an UHS-I card with no classification indication
is used, it may not be possible to perform HD
recording.
Usable
Bit Rate
SD Card
UHS-I U3
or higher
Class 10
or higher
Class 6 or
higher
Class 4 or
higher