. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7.14 LED Status Panel
To remove the LED status panel board, complete the following procedures:
1. Disconnect the AC power and any external devices (Section 7.4.1).
2. Remove the battery pack (Section 7.4.3).
3. Remove the DualBay device (Section 7.4.4).
4. Remove any PC Cards (Section 7.4.5).
5. Remove the keyboard (Section 7.7).
6. Remove the microphone/display cable cover and microphone (Section 7.11).
7. Remove the clutch covers/display assembly (Section 7.12.1).
8. Remove the top cover assembly (Section 7.13).
9. Disconnect the LED status panel board from the system board.
Figure 7-36. Removing the LED Status Panel Board
To replace the LED status panel, reverse the steps.
7-40
Computer Removal and Replacement Procedures