Prior To First Use - inventum FN2600 Instruction Manual

3
using the appliance for the first time
Before using the appliance for the first time, you should proceed as follows: carefully unpack the appliance and remove
all packaging material and any promotional stickers. Keep the packaging (plastic bags, polystyrene and cardboard) out
of the reach of children. After unpacking the appliance, carefully check it for external damage that may have occurred
during transport.
The appliance stands on 4 unbraked wheels. For that reason, place the appliance on a sturdy and flat surface, so that the
appliance cannot be moved unintentionally. Make sure there is enough space around the appliance for sufficient ventilation.
A minimum space of 10 cm is required between the appliance and the surrounding walls. For the top side, at least 70 cm
should remain free. In this way the appliance is able to release heat properly, freeze well and function in an energy efficient
way. Do not place the appliance near heat sources such as central heating or a stove.
After placing the appliance, leave it for at least 2 hours before inserting the plug in the socket.
First clean the interior of the appliance. Use warm soapy water with, for instance, washing-up liquid, all-purpose cleaner or
soda. Wipe the inside of the appliance after cleaning with clean water and properly wipe everything dry. Leave the appliance
to dry for 1 to 2 hours.
ATTACHING THE HANDLE AND LOCKING MECHANISM
A - mounting the handle
1. Cover cap of the handle
2. Locking mechanism
3. Screw
4. Handle
5. Base of the locking mechanism
• Remove the four screw and rings from the cover of the appliance.
• Place the handle correctly against the cover and fasten with the screws and rings.
B - mounting the locking mechanism
• Remove the two screws from the outside of the appliance.
• Place the base of the locking mechanism against the outside and fasten with the screws.
C - mounting the cover cap on the handle
A B C
1 2 3 4 5
1
3
2 4
7
5
6
19
English •