Compaq Armada 110 Deployment Manual page 4

Compaq Guide to PC Deployment
services
tcpdrv.dos
tcptsr.exe
tcputils.ini
tinyrfc.exe
umb.com
Modifying SYSTEM.INI and PROTOCOL.INI
SYSTEM.INI and PROTOCOL.INI are built dynamically during MNBU boot in order to automatically
load the detected NIC's driver. Further modifications to these files may be accomplished by editing
SYSINI.TMP and PROTINI.TMP for your specific needs. These two files contain the boilerplate text for
the INI files.
Note: The requirement that files are built dynamically requires that the MNBU diskette not be
write protected. This requirement is also necessary due to Microsoft Client's creation of password
list (.PWL) files.
Using a Specific Computer Name
If you wish to use a specific computer name instead of a randomly generated name, remove the line in
AUTOEXEC.BAT that begins with "unique."
REM **BEGIN RANDOM COMPUTER NAME GENERATOR**
REMOVE ->
REM **END COMPUTER NAME GENERATOR*
And edit NAME.TXT:
;UNIQUE Generated name
ComputerName=<YourName>
Performing Enterprise
Place any enterprise-specific functionality at the end of AUTOEXEC.BAT after the statement:
REM **BEGIN ENTERPRISE SPECIFIC FUNCTIONALITY**
Typically, this will include commands such as NET USE to map a network drive containing an operating
system installation image, WINNT.EXE /B to launch Windows NT Setup, or SETUP.EXE to launch
Windows 9x Setup.
For more information on using WINNT.EXE and the NET command (Windows NT Workstation
4.0) or SETUP.EXE (Windows 95 or Windows 98), refer to the appropriate Microsoft operating
system documentation.
Systems With Multiple Network Controllers
DETECT.BAT uses a program called SYSINV.EXE to find the first NIC in the system (defined by PCI
order). This NIC is referred to as NET0. The /eNET0 command line parameter can be found on the
SYSINV.EXE line in DETECT.BAT.
If you wish to identify another network controller instead of the default, change /eNET0 to
/eNET1. The third controller is NET2 and so on.
PRT/012A/0699
unique /f:name.txt /s:ComputerName=Boot$
type name.txt>>\net\system.ini
Specific Functions
-
4
Preliminary