Connecting External Devices - Sharp LC-AQUOS 20S5E-WH Operation Manual

Connecting External Devices

You can enjoy picture and sound by connecting devices, such as a VCR or
home video game system, to the terminals located on the rear of the LCD
TV set.
When connecting an external device, turn off the power of the LCD TV set
first to prevent any possible damage.
Terminals
EXT1
RGB (2-pin
Euro-SCART)
2-pin
Euro-SCART
connector*
To EXT terminal
<Example>
VCR
DVD Player
EXT3
S-VIDEO
S-Video Cable*
VIDEO
AUDIO (L)
AUDIO (R)
Audio/Video cable*
NOTE
• The cables marked with * are commercially available items.
• For more information about external device connections, see the operation manuals of your external devices.
• Make sure that the corresponding cables are connected to each terminal. Connecting other cables may result in a malfunction.
• EXT3 has two terminals, VIDEO and S-VIDEO terminals. If your external device has an S-VIDEO terminal, S-VIDEO connection is
recommended. S-VIDEO provides a finer, more detailed picture. If both terminals are connected, S-VIDEO terminal takes a priority.
• The PC input terminals are DDC1/2B-compatible.
• Refer to page 15 for a list of PC signals compatible with the TV.
• Macintosh adaptor may be required for use for some Macintosh computers.
• When connecting to a PC, the correct input signal type is automatically detected.
EXT2
Antenna terminal
AV (2-pin
Euro-SCART)
2-pin
Euro-SCART
connector*
To EXT2 terminal
<Example>
Decoder
To EXT3 terminal
S-Video
<Example>
DVD Player
VCR
Camcorder
Home video game system
Video
Audio (L)
Audio (R)
AUDIO OUT
AUDIO OUT (L)
AUDIO OUT (R)
Audio ø 3.5 mm
cable* stereo
minijack
cable*
Audio (L/R)
To AUDIO OUT terminal
<Example>
Audio amplifier
PC TERMINAL
5-pin mini D-sub
AUDIO (L/R) mini
RS-232C
RGB RGB/DVI
cable* conversion
cable*
To PC terminal
<Example>
Personal Computer
7
