Step 4: Fully Recharge The Battery; Step 5: Reenable Hibernation And Suspend; Conserving Battery Power - HP 2140 Mini-Note User Manual

Mini series
Table of Contents

Advertisement

To discharge a battery:
1.
Unplug the device from its external power source, but do not turn off the device.
2.
Run the device on battery power until the battery is discharged. The battery light begins to blink
when the battery has discharged to a low battery level. When the battery is discharged, the battery
light turns off and the device shuts down.

Step 4: Fully recharge the battery

To recharge the battery:
1.
Plug the device into external power and maintain external power until the battery is fully recharged.
When the battery is recharged, the battery light on the device turns off.
You can use the device while the battery is recharging, but the battery will charge faster if the device
is off.
2.
If the device is off, turn it on when the battery is fully charged and the battery light has turned off.

Step 5: Reenable Hibernation and Suspend

CAUTION:
information loss if the device reaches a critical battery level.
1.
Right-click the Power icon in the notification area, at the bottom of the Home Screen, and then
click Preferences.
– or –
Select Settings > System tab > Power Management.
2.
Under the On AC Power and On Battery Power tabs, reset the previous values for the following
settings:
Put the display to sleep when the computer is inactive for:
Put the computer to sleep when it is inactive for:
3.
Click Close.

Conserving battery power

Select low power-use settings through Power Management Preferences.
Turn off wireless and local area network (LAN) connections and exit modem applications when you
are not using them.
Disconnect external devices that are not plugged into an external power source, when you are not
using them.
Stop, disable, or remove any external media cards that you are not using.
Use the
If you leave your work, initiate Suspend or Hibernation, or shut down the device.
Failure to reenable Hibernation after calibration may result in a full battery discharge and
fn+f3
and
fn+f4
hotkeys to adjust screen brightness as needed.
Using battery power
41

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents