Table of Contents
Advertisement
2 InStAllIng the heAdSet on YoUr helMet
2. Remove the back plate.
3. Remove the rubber pad and replace it with the thicker rubber pad
included in the package.
4. Hook on the adapter to the clamp unit then screw in the glued
external adapter to the clamp unit.
5. Reconnect the speaker cable to the speaker port.
6. Locate a proper surface on the helmet to attach the unit then clean
the helmet surface location with a moistened towel and allow to dry
thoroughly.
7. Peel off the cover of the adhesive tape of the adapter and attach the
unit on the proper surface of your helmet.
Caution: Sena recommends using the clamp unit. The glued
surface mounting plate is provided for convenience, but is not the
recommended mounting method. Sena is not responsible for its
use.
50S Motorcycle Bluetooth Communication System | 11
2
1
Advertisement
Table of Contents
