Sena 50S-01 User Manual page 54

Motorcycle bluetooth communication system with mesh intercom
Hide thumbs Also See for 50S-01:
Table of Contents

Advertisement

13 CONFIGURATION SETTING
13.2.4 Audio Equalizer (Default: Off)
You can use the Audio Equalizer to increase/decrease the decibel level
of different frequency ranges of audio. 
Balance will adjust all of the frequency ranges to be the same volume
level (0 dB). Bass Boost will increase the bass range of audio (20 Hz -
250 Hz). Mid Boost will increase the mid range of audio (250 Hz - 4 kHz).
Treble Boost will increase the high range of audio (4 kHz - 20 kHz).
13.2.5 VOX Phone (Default: Enable)
If this feature is enabled, you can answer incoming calls by voice. When
you hear a ringtone for an incoming call, you can answer the phone
by saying a word such as "Hello" loudly or by blowing air into the
microphone. VOX phone is temporarily disabled if you are connected
to intercom. If this feature is disabled, you have to tap the Jog Dial or
the Phone Button to answer an incoming call.
13.2.6 VOX Intercom (Default: Disable)
If VOX Intercom is enabled, you can initiate an intercom conversation
with the last connected intercom friend by voice. When you want
to start intercom, say a word such as "Hello" loudly or blow air into
the microphone. If you start an intercom conversation by voice, the
intercom terminates automatically when you and your intercom friend
remain silent for 20 seconds. However, if you manually start an intercom
conversation by tapping the Jog Dial, you have to terminate the
intercom conversation manually. However, if you start the intercom
by voice and end it manually by tapping the Jog Dial, you will not be
able to start intercom by voice temporarily. In this case, you have to
tap the Jog Dial to restart the intercom. This is to prevent repeated
unintentional intercom connections by strong wind noise. After
rebooting the headset, you can start the intercom by voice again.
13.2.7 VOX Sensitivity (Default: 3)
VOX sensitivity can be adjusted depending on your riding
environment. Level 5 is the highest sensitivity setting and level 1 is the
lowest.
50S Motorcycle Bluetooth Communication System | 53

Advertisement

Table of Contents
loading

This manual is also suitable for:

50s

Table of Contents