Connecting Wireless Clients - Buffalo Tech AirStation Nfiniti WZR-HP-G300NH User Manual

Connecting Wireless Clients to the Access Point
Wireless Config section. By default, encryption is not enabled ("open").
If you prefer to use encryption and/or a different SSID, you may change these
default settings under the Wireless Config Tab.
To connect wireless devices to
the AirStation, you may either
enter the SSID and encryption key
manually, or you can use AOSS or
WPS.
Consult your wireless clients'
manuals for instructions on
configuring them manually. You
can get SSID and encryption
information from the AirStation's
12