(*3) If the input source is Blu-ray Disc and the speaker layout is 5.1 ch or less, DD+ cannot be selected. Instead, the listening mode for DD can be selected.

(*4) This can only be selected when no surround back speaker is connected.

(*5) Surround back speakers need to be installed.

(*6) If the input format is any of the following and the number of channels is monaural, this listening mode becomes unavailable.

– DTS, DTS 96/24, DTS Express, DTS-HD HR, DTS-HD MSTR, PCM, music file

(*7) Surround speakers or height speakers need to be installed.

(*8) A center speaker, surround speakers, or height speakers need to be installed.

(*9) Cannot be selected if "Speaker Virtualizer" ( →p115) is set to "Off".

(*10) This cannot be selected when height speakers are connected.

(*11) Surround speakers need to be installed.

(*12) Cannot be selected when the input format is monaural.

(*13) The listening mode displayed depends on the speaker layout ( →p151). Furthermore, when the setting for "Speaker Virtualizer" ( →p115) is "Off" (the default

value is On), then modes other than

Atmos and

DSur cannot be selected.

(*14) This cannot be selected when the input format is DTS Express.

‰ Speaker Layouts and Selectable Listening

Modes ( →p151)

159