Onkyo TX-NR6100 Instruction Manual page 104

Setup Menu
Menu list
1. Input/Output Assign 1. TV Out / OSD
2. HDMI Input
3. Digital Audio Input
4. Analog Audio Input
2. Speaker 1. Configuration
2. Crossover
3. Distance
4. Level Calibration
5. Dolby Enabled Speaker Change the settings of Dolby Enabled Speakers.
6. Equalizer Settings
7. THX Audio
8. Speaker Virtualizer
3. Audio Adjust 1. Multiplex/Mono
2. Dolby
3. DTS
4. LFE Level
5. Volume
Make settings for TV output and On-Screen Displays (OSD) that appear on the TV.
You can change input assignment between the input selectors and HDMI IN jacks.
Change input assignment between the input selectors and DIGITAL IN COAXIAL/OPTICAL jacks.
Change input assignment between the input selectors and AUDIO IN jacks.
Change the settings of connection environment of the speakers.
Change the settings of crossover frequencies.
Set the distance from each speaker to the listening position.
Adjust the volume level of each speaker.
You can adjust the output volume of the range for each connected speaker.
Change the THX Audio settings.
The Speaker Virtualizer function can be switched between On and Off.
Change the settings of multiplex audio playback.
Change the setting of when Dolby signals are input.
Change the setting of when DTS signals are input.
Set the low-frequency effect (LFE) level for Dolby Digital series, DTS series, Multichannel PCM,
and DSD signals.
Change the Volume settings.
Setup
p106
p108
p109
p109
p110
p111
p112
p112
p113
p113
p114
p115
p116
p116
p116
p117
p117
104