Frequently Asked Questions
Problem
Power Failure - Program
appears in the
Canceled
display.
12:00
appears in the
display.
Maximum operating duration
reached
appears in the
display.
appears in
Fault XX
the display.
The core temperature
cannot be set.
If the door is opened
while using
"Microwave" , the
oven stops making a
noise.
A noise is heard after
the cooking process is
complete.
120
Possible cause and solution
There has been a brief power failure which has
caused the current cooking process to stop.
Turn the oven off and then back on again.
Restart the cooking process.
The power supply was interrupted for longer than 200
hours.
Reset the date and time.
The oven has been operating for an unusually long
period of time; this has activated the safety shut-off.
Confirm with OK. Clear the message
by selecting .
Finished
The oven is now ready to use again.
A fault has occurred that you cannot resolve.
Contact Miele Technical Service.
The roast probe is not recognized by the oven.
Check whether the roast probe is correctly
plugged into the socket.
If the oven still does not recognize the roast probe, it
must be faulty. A replacement roast probe can be
ordered from Miele.
This is not a fault. If the door is opened while
"Microwave" is being used, the door contact
switch will turn off the microwave and switch the
cooling fan to a lower speed.
The fan remains turned on after a cooking program
(see "Settings - Cooling fan").
Program