Kärcher CVS 65/1 Bp Pack Manual page 8

DANGER
Health risk from dust
Wear a dust mask and safety goggles when cleaning with com-
pressed air.
ATTENTION
Risk of damage to the surfaces
Do not use any abrasive or aggressive detergents for cleaning.
1. Blow out the inside of the device with compressed air.
2. Clean the interior and exterior of the device using a damp
cloth, wetted with a mild washing lye.
Maintenance intervals
Maintenance by the customer
Note
All service and maintenance work must be carried out by qualified
staff; if necessary, a Kärcher specialist dealer can be called in at
any time.
● Daily maintenance
1 Check roller brush and side brush for wrapped straps.
2 Check the function of all control elements.
● Weekly maintenance
1 Check moving parts for ease of movement.
2 Check sealing strips in the sweeping area for adjustment and
wear.
3 Check the roller brush and side brush for wear.
4 Check the filter box, clean the pre-filter if necessary.
5 Check dust filter, clean if necessary (depending on frequency
of use, approx. every 10 hours).
● Monthly maintenance
1 Remove the roller brush and remove dirt from the drive pin
(see chapter "Checking / changing the roller brush")
● Maintenance after wear and tear
1 Adjust or change sealing strips.
2 Change the roller brush.
3 Change the side brush.
Note
For descriptions, see chapter "Maintenance work".
Maintenance by customer service
Note
In order to maintain warranty claims, all service and maintenance
work must be carried out by the authorized customer service
during the warranty period.
1 Have maintenance work carried out in accordance with the in-
spection checklist.
Maintenance work
Cleaning/changing the dust filter
DANGER
Health risk due to dust
Wear a dust mask and safety goggles when working on the filter
unit.
Locks (2x)
1
8
Lid of filter casing
2
Filter box
3
1. Switch off the device and turn it off at the ON/OFF switch.
2. Open the cover.
3. Open the locks.
4. Swivel the lid upwards.
5. Remove the filter box with the dust filter facing upwards.
Filter box
1
Dust filter
2
Pre-filter, removable
3
6. Check the dust filter and pre-filter.
a To clean, vacuum the dust filter or tap it out together with the
filter box (do not wash it out).
b Pull out the pre-filter and clean it.
7. Check and clean the filter wiper.
8. If damaged or highly contaminated, insert a new dust filter or
pre-filter in the filter box.
9. Observe the installation direction of the filter box during instal-
lation.
Changing the side brush is described for when the device is tilted.
ATTENTION
Risk of injury and damage
Before tilting the device, remove the battery and the sweep con-
tainer.
Secure the tilted device before changing the side brush.
lock
1
Side brush
2
Mount
3
1. Remove the waste container.
2. Remove the battery.
3. Tilt the device backwards and secure it against tipping down.
4. Unscrew the lock on the underside.
a To open: turn counterclockwise
b To close: turn clockwise
English
Change the side brush