Power Failure Transfer; Starting The System - Panasonic KX-T206 Installation Manual

In the event of a power failure, CO2 is connected to extension 22 automatically.
Note
• The system programmed data is protected by the factory provided lithium battery.
Plug the AC power cord into the system and an AC outlet.
• The power indicator of the system will light.
Note
• The plug adaptor is to be used if the power plug will not fit your socket. Assemble as shown
in the illustration, using the plug which fits your socket. In this case, be sure to connect the
frame of the unit to ground because the ground line in the power cable cannot be used.

Power Failure Transfer

Starting the System

power plug plug adaptor
to power outlet
17