Panasonic KX-T206 Installation Manual page 16

Installation of Lightning Protectors
Installation of the KX-A207
16
1. Secure the protector to a building with the enclosed
mounting screws.
2. Remove about 1 cm (
end of the earth wire. Insert the earth wire through the
bottom of the protector base and secure it to the earth
terminal.
3. Remove about 1.5 cm (
ends of the external and internal cables, then pass the
cables through the rubber packing.
4. Fold the external and internal cables, and connect them
to the terminal screws using washers.
5. Secure the external and internal cables and the earth
wire to the building. Then, install the arrester and
mount the cover on the protector.
13
/ inch) of insulation from the
32
19
/ inch) of insulation from the
32