Setup; Cleaning And Care; Protecting The Environment; Technical Specifications - EuroLite LED BL-20 G50 User Manual

Setting up your new LED light only takes a minute. First remove any packing material and unroll the light chain.
Then insert the connecting cord plug into the power adapter and tighten the lock nut to make sure the product is
protected against splash water. Insert the power adapter into a suitable wall socket. The LED bulbs will light up.
Hang the light chain using the attachment hooks. Select the desired color program with the controller according to
your application. To switch the light chain off, unplug the power adapter from the socket. If the product is not used
for a longer period, disconnect the adapter from the mains socket, to prevent unnecessary power consumption.
• Cleaning of the product is limited to the surface. Make sure that moisture does not come into contact with any
areas of the terminal connections or mains voltage control parts. Only wipe off the product with a dry, lint-free
cloth. Never use solvents or aggressive detergents. Disconnect the device from power before cleaning.
• The built-in LEDs are permanently installed; they cannot be replaced.
• The product does not contain any parts to be maintained. Do not attempt repairs as this is a security risk.
Disposal of old equipment
When to be definitively put out of operation, take the product to a local recycling plant for a disposal
which is not harmful to the environment. Devices marked with this symbol must not be disposed of as
household waste. Contact your retailer or local authorities for more information. Remove any inserted
batteries and dispose of them separately from the product.
Power supply:
Power consumption:
Protection grade:
Lamps:
Distance between lamps:
Maximum ambient temperature Ta:
Maximum housing temperature Tc (steady state):
Min. distance from flammable surfaces:
Min. distance to lighted object:
Total length:
Weight:
Specifications are subject to change without notice due to product improvements.

SETUP

CLEANING AND CARE

PROTECTING THE ENVIRONMENT

TECHNICAL SPECIFICATIONS

7 • EN
230 V AC, 50 Hz via power adapter
6 W
IP 44
20 x multicolor
60 cm
45° C
60° C
0.5 m
0.5 m
15 m
1 kg