Advertisement
CARE OF YOUR ARBOUR
The Arezzo Arbour is made of planed pressure treated and FSC certified timber and
as such is guaranteed against rot for a minimum of 15 years. However, it must be
remembered that as a natural product, timber is subject to movement and weather-
ing as it seasons. It is not uncommon for small spits to occur when drying and warp-
ing when timber is allowed to dry too rapidly. These will normally go back when
humidity rises, it is nature at work and not considered a fault.
Its colour will also change with time, a re-treatment, as required with a proprietary
wood treatment is recommended.
AREZZO ARBOUR
INSTRUCTIONS
SIDE SECTIONS
A
B
SEAT BACK
PANEL
C
SEAT
D
ROOF SECTIONS
E
ROOF FASCIA
F
FINIAL
G
ROOF COVER
STRIP
T
Screw
3. 5 x 30 mm
U
Screw
3. 5 x 50 mm
V
Screw
3. 5 x 70 mm
W
Screw
4 x 60 mm
X
Screw
4 x 90 mm
Screw
Y
4 x 120 mm
Z
Nails
2
2
1
2
4
2
1
8
8
8
10
2
4
4
Advertisement
Table of Contents
Related Manuals for Grange AREZZO ARBOUR
Summary of Contents for Grange AREZZO ARBOUR
- Page 1 Screw 3. 5 x 70 mm CARE OF YOUR ARBOUR The Arezzo Arbour is made of planed pressure treated and FSC certified timber and Screw 4 x 60 mm as such is guaranteed against rot for a minimum of 15 years. However, it must be...
- Page 2 Tools required (NOT SUPPLIED) Power screwdriver with Pozidrive No.2 bit. Tape measure. 3mm pilot drill Hammer. Before you start. Check the packs and make sure that you have all of the parts listed above. If not Fig 3 contact your retailer who will be able to help you. When you are ready to start make sure you have the right tools to hand, plenty of space and a clean dry area for assembly.
Need help?
Do you have a question about the AREZZO ARBOUR and is the answer not in the manual?
Questions and answers