The most common problems encountered are described in section 7 "Troubleshooting" of this document. You can download the latest version of this manual at aeno.com/documents. User information, including personal data, is protected from unauthorized access and disclosure in accordance with GDPR requirements.
Installation and Operation Manual AENO AP3 air purifier Conformance to Standards The device is CE certified and meets the requirements of the following European Union directives and regulations: Directive 2014/30/EU regulates the electromagnetic compatibility of equipment; Directive 2014/35/EU on low voltage;...
Page 6
Installation and Operation Manual AENO AP3 air purifier The crossed out trash can symbol is used to label electrical and electronic equipment and indicates separate collection. The symbol is given in accordance with the Waste Electrical and Electronic Equipment (WEEE)*...
Installation and Operation Manual AENO AP3 air purifier Warnings and Restrictions Please read the information in this section of the document carefully before you start installing and operating the device. WARNING! The warnings, precautions and instructions in this document may not include all possible hazards.
Page 8
Installation and Operation Manual AENO AP3 air purifier 2. Place the device on a dry and clean horizontal surface, making sure there is no chance of it toppling over. Never tilt the device while it is operating. 3. Do not install the device near open flames, hot surfaces, or heating appliances.
Page 9
Installation and Operation Manual AENO AP3 air purifier 18. Always unplug the power cord after using or cleaning the device. 19. Use only attachments, accessories, materials or replacement parts recommended or supplied by ASBISc. 20. Do not immerse the device in water or other liquids.
Page 10
Installation and Operation Manual AENO AP3 air purifier Warnings related to the use of UV radiation This type of decontamination is not harmful to the environment. Nevertheless, UV radiation that is not protected by the device casing can have an adverse effect on human health.
3.2.1 Cleaning the filter ........................27 3.2.2 Changing the filter ........................30 4 Warranty ................................31 4.1 AENO Service Centers ........................31 4.2 Warranty service procedure ....................... 32 4.3 Limitation of liability ........................32 5 Storage, Transportation and Disposal ..................34 6 Other information ............................
Page 12
Installation and Operation Manual AENO AP3 air purifier 7 Troubleshooting ............................37 8 Glossary ................................39 Figures and Tables Figure 1 – Appearance ..........................13 Figure 2 – Elements of the device ......................16 Figure 3 – Composition of the combined filter ................17 Figure 4 –...
AENO AP3 air purifier 1 General Description and Specifications 1.1 Device purpose The AENO air purifier is designed to clean indoor air from allergens, including flower pollen, fungal spores, dust particles, smoke, pet hair, as well as to eliminate unpleasant odors.
Installation and Operation Manual AENO AP3 air purifier Figure 2 – Elements of the device Elements of the device (see Figure 2): – device casing 2, 3 – air inlet and outlet openings – power cord connection port 5–10 – dashboard buttons –...
Installation and Operation Manual AENO AP3 air purifier Figure 3 – Composition of the combined filter The combination filter consists of a pre-filter (a), H13 class HEPA filter (b), charcoal filter (c) (see Figure 3). Pre-filter: captures particles as small as >0.2 mm (pet hair, hair, etc.).
Page 18
Installation and Operation Manual AENO AP3 air purifier Additional air cleaning and disinfection options Ionizer: produces negative ions, attracts residual dirt. UV lamp: Produces Type C ultraviolet radiation, with a wavelength of 275 nm. Ultraviolet radiation spectral range 205–315 nm neutralizes microorganisms such as bacteria, viruses and fungi*.
Installation and Operation Manual AENO AP3 air purifier 1.2 Technical Specification Table 1 – Basic technical specifications Parameter Meaning Model AAP0003 Managing Touchpad Types of cleaning Combined filter Ionizer UV lamp Nominal device parameters Input voltage: 12 V (DC) Input current: 1 A Nominal parameters of the Input voltage: 110–240 V (AC)
Page 20
Installation and Operation Manual AENO AP3 air purifier Parameter Meaning Operating modes (fan speed) Sleep mode (low speed) (950 rpm ±5 %) Average speed (1090 rpm ±5 %) High speed (1250 rpm ±5 %) Serviced area Up to 20 m Air purification time in the 0.5 hours...
Installation and Operation Manual AENO AP3 air purifier 1.3 Scope of Supply Figure 4 – Scope of Supply* The AENO AP3 air purifier is supplied with the following items (see Table 2). Table 2 – Scope of Supply Name Quantity AENO air purifier (see Figure 4-a) 1 pc.
1.5 Device management 1.5.1 Device control panel Figure 5 – Device control panel On the AENO AP3 air purifier control panel there are 6 indicator buttons which are used to control the device. Table 3 – Device control panel buttons...
Installation and Operation Manual AENO AP3 air purifier 1.5.2 Monitoring the need for filter replacement After 2200 hours of operation, the device emits a series of short beeps and the indicator of the "FILTER" button starts flashing. This means that the combined purifier filter is dirty and needs to be replaced.
Installation and Operation Manual AENO AP3 air purifier 2 Installation and operation To ensure proper operation of the AENO AP3 air purifier, proceed as follows: Unpack the device (see point 2.1) and plug it in using the power adapter. ...
Installation and Operation Manual AENO AP3 air purifier Figure 7 – Preparing for work Insert the plug of the power adapter into the socket on the back of the device casing and the plug of the power adapter into the wall outlet (see Figure 7-a).
Installation and Operation Manual AENO AP3 air purifier Figure 8 – Examples of device placement The air purifier enters standby mode after being plugged in. You can now control the device using the touch control panel. 2.2 Turning the device on and off After connecting to the mains all the indicators on the control panel light up blue for a few seconds and a short beep sounds.
Installation and Operation Manual AENO AP3 air purifier 3 Maintenance and Repair To maintain optimum condition and stable operation of the device, it is recommended that you periodically perform the following steps: cleaning of the device casing and filter;...
Page 28
Installation and Operation Manual AENO AP3 air purifier To clean the filter, turn it over and place it on a horizontal surface. Remove the bottom cover of the device by turning the handle counterclockwise. Remove the filter from the purifier casing by gently pulling on the fabric loops.
Installation and Operation Manual AENO AP3 air purifier WARNING! Do not immerse the device or filter in water or expose it to a stream of water. Figure 10 – Prohibition of contact with water Allow the filter to completely dry for at least 24 hours in a dry, sunny place before reinstalling it.
Installation and Operation Manual AENO AP3 air purifier 3.2.2 Changing the filter To change the filter, turn the device upside down and place it on a horizontal surface. Remove the bottom cover by turning it counterclockwise. Remove the worn filter from the purifier casing by pulling on the fabric loops.
Installation and Operation Manual AENO AP3 air purifier 4.2 Warranty service procedure If you discover an assumed flaw or defect in the device, you should contact an authorised service centre before the expiry of the warranty and provide the following: The device with an assumed flaw or defect.
Page 33
Installation and Operation Manual AENO AP3 air purifier defects caused by normal wear of the commodities, including the bags, device bodies, battery packs or Installation and Operation Manual; if the serial number (the factory stickers), date of manufacture or model name on the body of the device has been removed, erased, damaged or altered in any way, or is illegible;...
Installation and Operation Manual AENO AP3 air purifier 5 Storage, Transportation and Disposal The product can be transported at any distance by any type of transport that ensures the safety of the device, in accordance with the rules of cargo transportation operating on a particular type of transport.
Installation and Operation Manual AENO AP3 air purifier 7 Troubleshooting Table 4 shows typical problems that occur when connecting and configuring the device, and possible ways to fix them Table 4 – Typical Errors and Troubleshooting Methods № Problem Possible causes...
Page 38
Installation and Operation Manual AENO AP3 air purifier № Problem Possible causes Solution to blink even after least 3 seconds. The filter cleaning or run time will be reset replacing the filter and the LED will go off WARNING! If none of the possible solutions solves the problem, contact your supplier or service center.
Installation and Operation Manual AENO AP3 air purifier 8 Glossary Class III Electrical safety class in which the conditions of use of the equipment are not restricted. IP33 Protection against the action of foreign objects with a diameter greater than 2.5 mm, conductors, small tools (hand- held).
Need help?
Do you have a question about the AP3 and is the answer not in the manual?
Questions and answers