universalblue UBH2306-21 User Manual page 40

 An omnipolar switch capable to disconnect power
supply is required for installation. Disconnection from
power supply shall be provided with a switch or an
integrated fuse installed on fixed power supply
according to building code.
 Appliance is equipped with a type ''Y'' cord cable.
 Fixed connections shall be connected to a power supply
enabling omnipolar disconnection. For appliances with
over voltage category below III, disconnection device
shall be connected to fixed power supply according to
wiring code.
The appliance is conform to the following European
Directives and Regulations:
 Directive 2014/35/EC (Low voltage appliances)
 Directive 2014/30/EC (ElectroMagnetic Compability)
 Directive 2012/19/EC (WEEE-Waste Electrictal and
Electronic equipment)
 Directive 2009/125/EC (ErP- Eco Design)
 Directive
hazardous substances)
 Regulation 1935/2004/EC (Materials intended to
come into contact with food)
 Regulation 1907/2006/EC (REACH- Restriction of
chemicals)
2011/65/EC (RoHS- restriction of
40