Table of Contents
Advertisement
Additional Safety Instructions For
1.
READ THIS MANUAL. This man-
ual contains proper operating
instructions for this machine.
2.
DO NOT jam the grinder against
the workpiece. Firmly grasp the
grinder and ease it against the
workpiece using light pressure.
3.
DO NOT wear loose clothing while
operating this machine. Roll up or
button sleeves at the cuff.
4.
DO NOT place hands near, or in
contact with, mini grinder during
operation.
5.
GRIP THE WORKPIECE FIRMLY.
6.
NEVER leave the machine running
unattended.
Operating this mini grinder can propel
objects into the air, causing immedi-
ate eye damage. To protect your-
self, always wear American National
Standards Institute (ANSI) approved
safety glasses or goggles when oper-
ating this equipment.
Model H6155 Rotary Mini Grinder
Rotary Mini Grinders
7.
REPLACE grinding disks or sand-
ing sleeves when worn.
8.
NEVER work on more than one
item at a time.
9.
ALWAYS disconnect the machine
from the power source before
changing grinding disks, sanding
sleeves, or tool bits
10. ALWAYS test run the machine
before starting any work.
11. DO NOT use the flex shaft with a
tight bend. This may cause binding
and damage the inner spindle.
12. CLAMP THE WORKPIECE. DO
NOT hold the workpiece with one
hand and operate the mini grinder
with the other.
No list of safety guidelines can be
complete. Every shop environment
is different. Always consider safety
first, as it applies to your individual
working conditions. Use this and
other machinery with caution and
respect. Failure to do so could result
in serious personal injury, damage
to equipment or poor work results.
-3
-
Advertisement
Table of Contents
