Always wear a respi- rator NIOSH approved for the type of material being processed. Model H8218 Mini Die Grinder SAFETY Indicates an imminently hazardous situation which, if not avoided, WILL result in death or serious injury.
Page 4
23. BE AWARE OF HOSE LOCATION. Hoses can easily become a tripping hazard when laid across the floor in a disorganized fashion. 24. DO UNDER INFLUENCE DRUGS ALCOHOL, OR WHEN TIRED. Model H8218 Mini Die Grinder UNTRAINED...
INTRODUCTION Foreword specifications, photographs in this manual represent the Model H8218 as supplied when the manual was prepared. However, owing to Grizzly’s policy of continuous improvement, changes may be made at any time with no obligation on the part of Grizzly.
Installing Bits The Model H8218 uses bits and cutters with a " diameter shaft. See the Grizzly catalog or www.grizzly.com for a complete listing of available bits and accessories.
6. To turn the grinder OFF, release the trigger. 7. To avoid accidental starting, discon- nect the grinder from the air supply when it is not in use. Model H8218 Mini Die Grinder LUNG/EAR INJURY HAZARD! Wear protective equipment when using this tool.