1. Manuals
  2. Brands
  3. Victory Manuals
  4. Chipper
  5. WC-8H
  6. Operator's manual

Victory WC-8H Operator's Manual

Woodchipper with self-propelled hydraulic infeed motor
Hide thumbs Also See for WC-8H:
Table of Contents

Advertisement

Quick Links

Download this manual
Operator's Manual
WC-8H WOODCHIPPER
With Self-Propelled Hydraulic
Infeed Motor
VERSION 2.0 - EN 2022

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the WC-8H and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Victory WC-8H

Summary of Contents for Victory WC-8H

  • Page 1 Operator's Manual WC-8H WOODCHIPPER With Self-Propelled Hydraulic Infeed Motor VERSION 2.0 - EN 2022...
  • Page 2 No part of this documentation may be reproduced in any form without the written permission of Victory Tractor Implements. History of changes: Operator’s Manual Date: Chapters: Description: Version: V1.0 2021 First edition. V2.0 July 2022 Editorial update. Layout update. Operator’s Manual Victory WC-8H - Page 2 of 64 - Version 2.0...

  • Page 3: Table Of Contents

    Practice Safe Maintenance ..................15 3.6.5 Prepare For Emergencies ................... 15 SAFETY AND HEALTH MEASURES WHEN USING HYDRAULIC FLUID ........16 INFEED ROLLERS SAFETY ....................16 PTO DRIVELINE SAFETY ...................... 16 Operator’s Manual Victory WC-8H - Page 3 of 64 - Version 2.0...
  • Page 4 3.9.1 Driveline Safety Checklist .................... 17 3.10 Not Allowed Use ......................... 19 3.11 Safety Decals and Markings on the WC-8H ................ 19 3.12 Calamities ..........................21 ASSEMBLY INSTRUCTIONS ......................22 Assembly Info: ........................23 4.1.1 Determine the PTO Shaft Length; shorten it if necessary .......... 27 4.1.2...
  • Page 5 Torque Specifications ......................60 FLYWHEEL KNIFE CARE ......................61 10.1 How long will my Woodchipper Knives last? ..............61 VICTORY TRACTOR IMPLEMENTS WARRANTY ............... 62 SPECIFICATIONS, FEATURES, PERFORMANCE ................ 63 Operator’s Manual Victory WC-8H - Page 5 of 64 -...

  • Page 6: Preface

    8 x 8” infeed opening. The WC-8H is used on smaller sub-compact tractors with as little as 15 hp at the PTO, such as BX series Kubotas, John Deere 1000 series, New Holland, Massy Ferguson GC series, Mahindra Max series, and more.

  • Page 7: Introduction

    (562) 534-8182. Victory has trained technicians, spare parts, and equipment to service the device. The parts on your machine are specially designed; replace these parts always with genuine Victory parts. Please reference your order number or serial number when calling.

  • Page 8: Introduction

    INTRODUCTION About This Manual This Operator’s manual belongs to the owner of the Victory WC-8H woodchipper. Read this Operator’s Manual before operating the WC-8H • Pay special attention to safety precautions presented in this manual, as they prevent accidents causing machine damage, human injury, or death.

  • Page 9: Safety Warning Messages In This Manual

    Safety Warning Messages in this Manual Read this manual carefully before using the WC-8H to understand how to use it correctly. ◼ After reading, store the manual in a safe place, easily accessible for everyone working with the machine. ◼...

  • Page 10: Intended Use

    Intended Use The WC-8H is a woodchipper for tree branches max 5” thick and other pruning waste. Unintended Use Unintentional use is any other use than described under 'Intended use.' Intended Operating Conditions ◼ Ambient temperature: 0° to + 40°C.

  • Page 11: Safety Information

    Do not remove the brought warning stickers or markings. ◼ Always clean the machine properly and keep the workplace free of dirt and obstacles. ◼ Always use the equipment in daylight or ensure sufficient artificial lighting. Operator’s Manual Victory WC-8H - Page 11 of 64 - Version 2.0...

  • Page 12: Personal Protective Equipment

    Always use tools that are in a good state of repair. Ensure you know how to use the tools before doing any work. ◼ ONLY use replacement parts from the same brand as the relevant part. Operator’s Manual Victory WC-8H - Page 12 of 64 - Version 2.0...

  • Page 13: Additional Safety Rules For Woodchippers

    When raising and moving implements, watch for wires, trees, etc. Make sure all persons are clear of the working area. ◼ Turning the tractor too tight may cause the implement to ride upon wheels. It can result in injury or equipment damage. Operator’s Manual Victory WC-8H - Page 13 of 64 - Version 2.0...

  • Page 14: More Safety Tips For Safe Operation

    Do not wear loose clothing when working around the woodchipper. Personal injury can occur if someone or something turns the flywheel over while checking the knives or adjusting the cutter bar. The flywheel has enough residual energy to remove fingers easily. Operator’s Manual Victory WC-8H - Page 14 of 64 - Version 2.0...

  • Page 15: Use Safety Lights And Devices

    Comply with state and local laws. ◼ The maximum transport speed for any Victory implement is twenty mph on paved surfaces and ten mph maximum on an unpaved surface. Do not exceed. Never travel at a speed that does not allow adequate control of steering and stopping. Rough terrain requires a slower speed.

  • Page 16: Safety And Health Measures When Using Hydraulic Fluid

    The safety rules below relate to the driveline of agricultural implements, general safety literature, and the standards published by the American Society of Agricultural Engineers. ◼ Read and follow instructions on PTO safety decals. Operator’s Manual Victory WC-8H - Page 16 of 64 - Version 2.0...

  • Page 17: Driveline Safety Checklist

    You can find Information concerning these parameters in all driveline manufacturer’s catalogs. ◼ For the tractor's PTO shaft connections, specify a safety type yoke (twist or slide collar) to minimize protrusions. Operator’s Manual Victory WC-8H - Page 17 of 64 - Version 2.0...
  • Page 18 Implement power take-off driveline specifications. ◼ S333 Agricultural tractor auxiliary power take-off drives. ◼ S350 Safety alert symbol for agricultural equipment. ◼ S441 Safety signs. ◼ S493 Guarding for agricultural equipment. Operator’s Manual Victory WC-8H - Page 18 of 64 - Version 2.0...

  • Page 19: 3.10 Not Allowed Use

    ◼ Keep all safety decals clean and legible. ◼ Replace all damaged or missing decals or labels. To order new ones, call Victory Tractor Implements. ◼ New equipment installed during repair requires safety labels to be affixed to the replaced component as specified.
  • Page 20 DANGER decal TURNING COMPONENTS. • Danger of being caught by rotating parts. WARNING decal WARNING FOR HIGH-PRESSURE HYDRAULIC FLUID. WARNING decal MAX. OPERATING PTO SHAFT SPEED 540 rpm. Operator’s Manual Victory WC-8H - Page 20 of 64 - Version 2.0...

  • Page 21: 3.12 Calamities

    This includes any accident that directly or indirectly results in device damage and personal injury to one or more persons. Operator’s Manual Victory WC-8H - Page 21 of 64 - Version 2.0...

  • Page 22: Assembly Instructions

    Concerning this woodchipper, calamities arise when unauthorized persons use the machine. Never lend the woodchipper without the Operator's manual. Ensure that people always read and understand the manual content before use. ASSEMBLY INSTRUCTIONS The WC-8H as it comes packed in a crate ◼ Width: 44”...

  • Page 23: Assembly Info

    Mount and tighten twelve M10 bolts, washers, spring washers, and nuts. Note: ◼ Take note of the mounting holes for the hydraulic valve later. Operator’s Manual Victory WC-8H - Page 23 of 64 - Version 2.0...
  • Page 24 Place the Infeed roller lifting bar (1) on top of the chipper chute. ◼ Fix it with four M10x30 bolts (2) with washers, spring washers, and nuts. ◼ Tighten all nuts. Operator’s Manual Victory WC-8H - Page 24 of 64 - Version 2.0...
  • Page 25 Position the hydraulic valve control lever (2) in place and fix it with a M10x.. bolt, washer, and nut with a Nylon lock. ◼ Ensure all pivot points can move. Operator’s Manual Victory WC-8H - Page 25 of 64 - Version 2.0...
  • Page 26 You must make every effort to ensure that all hardware is tightened. It is a good idea for you to double-check. Operator’s Manual Victory WC-8H - Page 26 of 64 - Version 2.0...

  • Page 27: Determine The Pto Shaft Length; Shorten It If Necessary

    1/3 the free length, with both inner and outer telescopic parts of equal size. ◼ The minimum and maximum telescoping on the PTO shaft is 26” to 32”. Operator’s Manual Victory WC-8H - Page 27 of 64 - Version 2.0...

  • Page 28: Install The Pto Shaft

    NOTE: Attach the one end with the shear bolt to the woodchipper. ◼ Secure the chain to the tractor and implement. This will prevent the shield from spinning during operation. Operator’s Manual Victory WC-8H - Page 28 of 64 - Version 2.0...

  • Page 29: Checking The Pto Shaft's Interference

    Tractors with or without implements attached can often be noisy enough to cause permanent, partial hearing loss. We recommend that you wear hearing protection full-time if the noise in the operator’s position exceeds 80 dB. Operator’s Manual Victory WC-8H - Page 29 of 64 - Version 2.0...

  • Page 30: Preparation Before Operating

    Ensure you understand all safety signs on the tractor and the woodchipper. ◼ Adhere to PPE safety regulations as described in both tractor and woodchipper manuals. ◼ Inspect the whole WC-8H visually and check all vital components like mounting bolts. ◼ Ensure the hydraulic system is filled with hydraulic oil. ◼...

  • Page 31: Pre-Operation Checklist

    Ensure all guards and shields are in place, secured, and functioning as designed. Check the condition of the curtain in the infeed hopper. It must be in good shape to prevent chips from flying out. Operator’s Manual Victory WC-8H - Page 31 of 64 - Version 2.0...

  • Page 32: Adjusting The Discharge Chute

    Lubricate all grease nipples. After operating for 10 hours: Repeat steps 1 through 5 listed above. Go to the regular servicing and Maintenance schedule defined in the Maintenance section. Operator’s Manual Victory WC-8H - Page 32 of 64 - Version 2.0...

  • Page 33: Instructions Before Starting The Woodchipper

    Move the lever into the remaining positions, and run it for 2-3 minutes each. When you notice that the feed rollers change direction when the safety bar is pushed forward or pulled backward, the system is purged. Operator’s Manual Victory WC-8H - Page 33 of 64 - Version 2.0...
  • Page 34 N O T I CE : • The setup is now complete. You must read and understand all operating instructions before using the chipper. Operator’s Manual Victory WC-8H - Page 34 of 64 - Version 2.0...
  • Page 35 Operator’s Manual Victory WC-8H - Page 35 of 64 - Version 2.0...

  • Page 36: Operation

    OPERATION The features of the WC-8H are described in this Chapter to ensure that you can use it to its full potential. The operation procedures ensure that every operator uses the WC-8H correctly. Following these procedures will extend the life of the WC-8H, creating a safe operating environment.

  • Page 37: Workplace

    Preparation before operating ◼ Inspect the whole WC-8H visually and check all vital components like hoses and their connections, lines, hoses and wires for damage, kinking, wear or dirt. ◼ Visually inspect the condition of the engine and hydraulic pump system.

  • Page 38: Using The Safety Handle

    This will prevent the feed rollers from pulling material in. Operator’s Manual Victory WC-8H - Page 38 of 64 -...
  • Page 39 Never place any part of your body into a position that causes an unsafe working condition. ◼ Hold small diameter branches together in a bundle and feed in simultaneously. Operator’s Manual Victory WC-8H - Page 39 of 64 - Version 2.0...

  • Page 40: Other Activities

    ◼ Always replace cracked, frayed, worn, or stretched drive belts. ◼ Always replace the complete set of 4 drive belts. Use genuine drive belts. Operator’s Manual Victory WC-8H - Page 40 of 64 - Version 2.0...
  • Page 41 ◼ Adjust the drive belt as shown in the previous figure. ◼ Tighten mounting bolts (1). ◼ Secure adjusting bolt (2). ◼ Mount the pulley cover. Operator’s Manual Victory WC-8H - Page 41 of 64 - Version 2.0...
  • Page 42 DO NOT over-torque the bolts; knife breakage can occur. ◼ Remove the lock pin, rotate the flywheel 180 degrees, and reinstall the lock pin for the second knife. Operator’s Manual Victory WC-8H - Page 42 of 64 - Version 2.0...
  • Page 43 Changing the Oil Filter ◼ Remove the hydraulic line from the tank. ◼ Remove three screws that secure the filter assembly. ◼ Remove the filter assembly and replace the oil filter. Operator’s Manual Victory WC-8H - Page 43 of 64 - Version 2.0...

  • Page 44: Maintenance And Repair

    MAINTENANCE AND REPAIR This manual describes periodic maintenance that the owner can do. However, any care that requires special tools or technical experience should be left to Victory authorized service technicians. Only qualified service personnel can carry out activities other than operating activities.

  • Page 45: Lubrication

    Bearing Lubrication Guide; Based on Environmental Conditions There are many questions when it comes to greasing bearings. All Victory tractor implements are equipped with factory lubricated bearings so that 33% of the race is full of grease; this allows for operation at all speed ranges.

  • Page 46: Hydraulic Oil Reservoir

    ◼ To avoid skipping certain parts, a good practice is to follow the direction of the oil. Starting at the reservoir. Operator’s Manual Victory WC-8H - Page 46 of 64 - Version 2.0...

  • Page 47: General Troubleshooting

    This section can help the operator when a problem arises. It gives basic guidelines if something on the woodchipper is not working correctly. If the procedures in this section do not solve the problem, the owner should contact the Victory Service department for assistance. Problem:...

  • Page 48: Spare Parts And Wearing Parts

    Order spare parts by referring to the parts list. Always state the correct make, type, and part number when ordering. Order Parts Contact Victory Tractor Implements to order spare parts. When ordering spare parts, you must always have the following information: ◼...

  • Page 49: Wearing Parts

    For the reliable operation of a tool, it is essential that wearing parts are of high quality. It is also helpful that a service organization responds to failure situations and unexpected material needs. Wear parts are permanently excluded from the warranty. Wearing parts for the WC-8H Woodchipper: ◼ Knives set; 2 Flywheel knives, Bed counter knife, including fasteners.

  • Page 50: Transport, Storage, And Environment

    Remove the tarp if covered. ◼ Review and follow the pre-operation checklist. Decommissioning and Environment 8.2.1 Decommissioning Requirements ◼ The machine is clean. ◼ Ensure that all liquid systems are empty. Operator’s Manual Victory WC-8H - Page 50 of 64 - Version 2.0...

  • Page 51: Environment

    Information on different waste collection is available from your municipal environmental organization. Operator’s Manual Victory WC-8H - Page 51 of 64 - Version 2.0...

  • Page 52: Exploded View Drawings

    EXPLODED VIEW DRAWINGS VICTORY WC-8H Exploded View; Main Parts Main Parts: Pos.: Part number: Description: Qty: Frame Frame mounting plate Flywheel housing Flywheel housing top Bolt Washer Discharge chute Washer Bolt Operator’s Manual Victory WC-8H - Page 52 of 64 -...
  • Page 53 VICTORY WC-8H Exploded View; Flywheel with Knifes Parts Flywheel with knives: Pos.: Part number: Description: Qty: Flywheel Chipper Knife blade Bolt M10x1.5x35 Flat socket cap screw GR 10.9 Bolt M.. x Nut, Nylon lock Flywheel shaft Key Flywheel shaft Nut M10x1,5 Nylon lock Washer M10 Operator’s Manual Victory WC-8H...
  • Page 54 VICTORY WC-8H Exploded View; Hydraulic Infeed System Parts Infeed System: Pos.: Part number: Description: Frame mounting plate Bolt Bearing block Cover shell Nut M10x1.5 Nylon lock Bolt M10x1.5x35 Flat socket cap screw GR 10.9 Bed Counter knife Bearing block Operator’s Manual Victory WC-8H - Page 54 of 64 - Version 2.0...
  • Page 55 Infeed control handle Infeed Chute extension Spring washer Washer Connection plate Collar ring Split pin Bolt M10x30 Infeed roller bearing block Cover shell Bolt M10x.. Spring washer M10 Washer M10 Operator’s Manual Victory WC-8H - Page 55 of 64 - Version 2.0...
  • Page 56 VICTORY WC-8H Exploded View; Drive System Parts Drive System: Pos.: Part number: Description: Qty: Lower frame Upper frame Bolt M..x.. Nut M.. Bolt M..x.. Wing nut M.. Spring washer M.. Washer M.. Bolt M..x.. Bearing block Nut M..x.. Bolt M..x..
  • Page 57 Drive Belt Bolt M..x.. Power input shaft bearing block Washer Nut M.. Drive belt Hydraulic pump Drive belts adjusting bolt Adjustable hitch pin bracket Washer M.. Bolt M..x.. Operator’s Manual Victory WC-8H - Page 57 of 64 - Version 2.0...
  • Page 58 VICTORY WC-8H Exploded View; Flywheel Bearings Parts Flywheel bearings: Pos.: Part number: Description: Qty: Power input shaft bearing block bracket Power input shaft bearing block Bolt Washer Spring washer Power input shaft Power input shaft key Operator’s Manual Victory WC-8H - Page 58 of 64 - Version 2.0...
  • Page 59 VICTORY WC-8H Exploded View; Infeed Hopper & Hydraulic valve Parts Infeed Hopper & Hydraulic valve: Pos.: Part number: Description: Qty: Bottom plate Side plates set Securing ring Support bracket Eyebolt Support Handle bracket Bolt Top plate Bolt Hydraulic valve Operator’s Manual Victory WC-8H - Page 59 of 64 - Version 2.0...

  • Page 60: Torque Specifications

    Tighten all bolts to the torques specified unless otherwise noted. Check the tightness of bolts periodically, using this bolt torque chart as a guide. Replace fasteners with the same length and grade of bolt. Operator’s Manual Victory WC-8H - Page 60 of 64 - Version 2.0...

  • Page 61: 10 Flywheel Knife Care

    10 FLYWHEEL KNIFE CARE 10.1 How long will my Woodchipper Knives last? We get asked this question very often. Victory woodchippers are equipped with knives made from very high-quality tool steel. All woodchipper knives will be dull over time and require sharpening or replacing.

  • Page 62: 11 Victory Tractor Implements Warranty

    This Warranty does not apply to any part or product that, in Victory’s judgment shall have been misused or damaged by an accident or lack of regular maintenance or care or which has been repaired or altered in a way that adversely affects its performance or reliability, or which has been used for a purpose for which the product is not designed.

  • Page 63: 12 Specifications, Features, Performance

    Removable input chute extension for easy storage. ◼ Hydraulic hoses with Nylon wrap for protection. ◼ 24” rotor; 200 lb. ◼ Variable Infeed speed up 78 ft./min. (depending on PTO rpm). Operator’s Manual Victory WC-8H - Page 63 of 64 - Version 2.0...
  • Page 64 The large opening of the infeed chute allows for reliable and professional wood chipping without concerns. ◼ The compact WC-8H is suitable for your small to mid-sized tractors between 25 to 45 hp, utilizing your CAT I + II; 3-Point Hitch. ◼...

Table of Contents