INSTALLATION OF THE OVEN FEET
In order to install the oven feet;
1. Foot attachment lath is installed on the oven from the bottom
of the oven as shown in (figure 7).Nuts are centered on these
lathes in order to screw feet. Complete the feet installation
process by screwing the feet to the nuts (figure 8).
2. You can balance your oven by turning the screwed feet
according to the surface type you are using.
3. If your oven has telescopic feet as in (figure 9) you can
adjust your ovens height from these feet as turned clockwise or
anticlockwise.
Figure 7
CHAIN LASHING ILLUSTRATION
Before using the appliance, in order
to ensure safe use, be sure to fix the
appliance to the wall using thechain
and hooked screw supplied. Ensure
that the hook is screwed into the wall
securely.
Figure 8
31
Figure 9