Sailor RM2042 Technical Manual page 13

1 INTRODUCTION
This button is used to step backward, to the last selected menu window in an input sequence.
LAST
These buttons is used to scroll between the possible choices in the actual diplayed menu.
Note that these buttons only will be active, when their signs are shown in the display readout.
These buttons are used to scroll between the input fields in the actual displayed menu
window. When an input has been keyed in, and the <-button is pushed the last input will be
cleared.
Digits 0 to 9, used for numerical input data to the unit.
ABC
These characters will be selected when the user is in a mode where the unit accepts
1
alphabetic characters. At the first activation the first character will be displayed in the actual
display input field, at the second activation the second character will be displayed etc. When
'>'-button is activated, the displayed character is selected, and the next input field is shown
with a blinking readout.
This button is used as a delimiter, when time data or position data are entered from the
DEG
.
keyboard.
This key is used to accept the displayed station data in a call composition. When the data
STOP
has been accepted it will be possible to enter a telephone number, if the entered station is
ENT
a coast station.
The enter button can also be used to accept entered keyboard inputs, when valid data has
been entered in a menu window.
Selects the degree sign in an input sequence for position data.
DEG
.
Stops the build-in alarm circuits, when a distress message has been received.
STOP
ENT
RM2042
PAGE 1-5