Using Windows - D-Link DWR-920 User Manual

Section 4 - Connecting to a Wireless Network
Connect to a Wireless Network

Using Windows

XP
®
Windows XP users may use the built-in wireless utility (Zero Configuration Utility). The following instructions are for Service Pack 2 users. If you are
®
using another company's utility or Windows 2000, please refer to the user manual of your wireless adapter for help with connecting to a wireless
®
network. Most utilities will have a "site survey" option similar to the Windows XP utility as seen below.
®
If you receive the Wireless Networks Detected bubble, click on the center of the bubble
to access the utility.
or
Right-click on the wireless computer icon in your system tray (lower-right corner next to
the time). Select View Available Wireless Networks.
The utility will display any available wireless networks in your area. Click on a network
(displayed using the SSID) and click the Connect button.
If you get a good signal but cannot access the Internet, check the TCP/IP settings for your
wireless adapter. Refer to Networking Basics on page 78 for more information.
dlink_DWR-920_xxxx
D-Link DWR-920 User Manual 75