Page 1
1800 PSI Electric Pressure Washer Congratulations on the purchase of your new ACTIVE™ pressure washer. In order to ensure you have the best possible experience, please read through the following instructions. If you require any help, please contact the customer service department at: Model no.VE52...
Table of Contents 1. I ..........................3 mportant recautIons 1.1 D ................................3 efInItIons 1.2 s ..............................3 afety arnIngs 1.3 I ............................. 5 ntenDeD pplIcatIon 2. s ....................5 afety eatures anD lectrIcal nformatIon 2.1 e ..............................5 xtensIon orDs 3.
Important Precautions 1. I mportant recautIons 1.2 Safety Warnings IMPORTANT, RETAIN FOR FUTURE REFERENCE AND READ CAREFULLY! DANGER Do not attempt to install or operate this device until you have read To reduce the risk of fire, electric shock, explosion or injury to the safety instructions in this manual.
Page 4
Important Precautions 1. I mportant recautIons cont 1.2 Safety Warnings (cont.) CAUTION — USE WARNING — INJECTION HAZARD • Learn how to stop the device and release the pressure quickly. Familiarize yourself with the controls. • Equipment can cause serious injury if the spray penetrates •...
Please refer to the icons below for suggested applications. For questions regarding other uses, please refer CAUTION — USE A SUFFICIENT GAUGE to our website at www.active-jobsite.com or call us at 1-844-777-4555. • Maximum cable length: 50’ (15 m). Only use 14 AWG rated extension cords.
Exploded View / Parts List 3. e xploded 4. p arts Item # Part Name Qty. Part # Item # Part Name Qty. Part # Quick-connect Hose holder kit 1 set XE16-020-0002 VE20-000-0004 wand (2 pcs) Gun assembly Bottle holder XE16-020-0003 VE10-000-0002 High-pressure...
Assembly Instructions 5. a ssembly nstructIons 5.1 Surface Preparation 5.4 Assembly Steps Before beginning any cleaning task, it is important to inspect the area for objects that could create a hazard. Remove any objects from the work area that could be tripped over, such as toys or outdoor furniture.
Page 8
Assembly Instructions 5. a ssembly nstructIons cont 5.4 Assembly Steps (cont.) Attach high-pressure hose to the gun and the pump outlet (hand tighten only). 0º 15º 40º Attach the desired spray tip to the wand. The spray tips are for the following purposes: •...
Page 9
Assembly Instructions 5. a ssembly nstructIons cont 5.4 Assembly Steps (cont.) RESET Connect garden hose to the inlet adaptor. TEST Plug the GFCI plug into an outlet. Firmly press and release the TEST button, then press and release the RESET button. The light on the GFCI should be illuminated.
Page 10
Assembly Instructions 5. a ssembly nstructIons cont 5.4 Assembly Steps (cont.) Ö Ä PURGING ON/OFF button Push the ON/OFF button, LED indicator turns red colour and the machine is ready to operate. Push the ON/OFF button again to set the machine in OFF mode. Purge air by squeezing the trigger on the gun until there is a steady stream of water.
Operating Instructions 6. o peratIng nstructIons 6.1 Working with Foam Blaster Working with a detergent ensures quick soaking of the dirt, and allows the high-pressure water to penetrate and remove the dirt more effectively. Always spray detergent on a dry surface, do not pre-soak the area.
Operating Instructions 6. o peratIng nstructIons cont 6.2 Shutting Down and Cleaning Up 6.4 Warnings Turn off water supply and disconnect the garden hose CAUTION from the water inlet on the pressure washer. Failure to clean this product properly will cause the detergent Pull the trigger to release any remaining water pressure.
Winterizing and Long-Term Storage 7. w • InterIzIng and torage • 7.1 Optimum Winterizing Procedure CAUTION Winterizing your pressure washer will help protect and prolong Drain any remaining water from the gun assembly. Aim the its life. We strongly recommend you follow the below steps using gun downwards and pull the trigger.
Cleaning and Maintenance / Technical Specifications 8. c leanIng and aIntenance 8.1 Connections 8.3 Water Filter Screen The connections on the pressure washer’s hoses, gun, and spray wand should be cleaned and lubricated with non-water soluble grease regularly. 8.2 Cleaning the Nozzles The pressure washer is equipped with a water inlet screen to protect the pump.
Troubleshooting 10. t roubleshootIng Problem Cause Solution The device The pump is sucking Check if all hoses and Disconnect the device from the power source before making any does not reach air. fittings are airtight. repairs. high pressures Turn the device to (continued).
Page 16
Hotline. permissible). Oil is dripping. Oil seals are Call the Toll-free damaged or worn. Hotline. IF YOU ENCOUNTER ANY ADDITIONAL DIFFICULTIES NOT LISTED, VISIT OUR WEBSITE AT WWW.ACTIVE-JOBSITE.COM OR CALL CUSTOMER SERVICE FOR HELP AT 1-844-777-4555.
This product is guaranteed to be free from defects in material and workmanship for two years from the date of its original purchase. If such a defect appears during the warranty period, upon presentation of proof of purchase and damage, Active Products will elect to either (1) replace the product or defective component at no charge and free shipping or (2) refund the full purchase price to the owner (at its discretion).
Need help?
Do you have a question about the VE52 and is the answer not in the manual?
Questions and answers