Programme End During Rinse Hold; Programme End; Removing Laundry/Switching Off The Appliance - Siemens WM16Y8891W Instruction Manual And Installation Instructions

Table of Contents

Advertisement

Programme end during rinse
hold
The following appears on the display
panel:
Continue the programme by:
Select the Spin (change the spin
speed if necessary) or the Drain
programme.
Press the Ü button.

Programme end

ÏFinished, remove washing appears
on the display panel. The Ü button
indicator lamp is off.
Removing laundry/switching
off the appliance
Open the loading door and remove
1.
the laundry. Follow the information
on the display panel.
Press the # button. The appliance is
2.
switched off.
Turn off the tap.
3.
Not required for AquaStop
Note:
models.
Notes
Do not leave any items of laundry in
the drum. They may shrink in the
next wash or discolour another item.
Remove any foreign objects from the
drum and the rubber gasket – risk of
rusting.
Wipe the rubber gasket dry.
Operating the appliance
Notes
Leave the loading door and
detergent drawer open so that any
residual water can evaporate.
Always wait until the programme
ends, as the appliance could still be
locked. Then switch the appliance
on and wait for it to unlock.
If the display panel goes off at the
end of a programme, the energy-
saving mode is active. Press any
button to activate the panel.
en
33

Advertisement

Table of Contents
loading

Table of Contents