Commissioning; Preparatory Steps - Endress+Hauser Liquiline System CA80AL Brief Operating Instructions

Liquiline System CA80AL
6.3.6 Tables
• Tables are needed to map mathematical functions .
• You edit a table by navigating through rows and columns with the navigator and changing
the values of the cells.
• You only edit the numerical values. The controller automatically takes care of the
engineering units.
• You can add lines to the table ( INSERT) or delete lines from the table ( DEL).
• Afterwards, you save the table ( SAVE).
• You can also cancel your entries any time using the  soft key.
• Example: Menu/Setup/Inputs/pH/Medium comp.
7

Commissioning

7.1

Preparatory steps

7.1.1 Connecting the liquid-bearing suction lines
First connect the liquid-bearing lines and visually inspect the hoses before establishing
the connection to the power supply. It is possible that both the sample preparation and
the analyzer will start directly and supply sample into the device.
The reagents used can pose a health hazard. Pay attention to the information in the
reagent safety data sheets.
CAUTION
L
Automatic cleaning function for the suction hose
Risk of injury from contact with very acidic cleaning solution
‣
Do not shorten the system intake hose.
Endress+Hauser
Commissioning
41