Monte Carlo Fan Company 5BR52 D Series Owner's Manual And Installation Manual page 7

36
Attached light fixture on to the light
pan, aligning the keyhole slots with
the preassembled screws on the light
pan. Twist clockwise till lock. Install
the screw removed in step 34. Tighten
all screws securely.
39
Attached bottom cage onto
glass as shown.
© 2013 Monte Carlo Fan Company
37
Install 3 x 40-watt candelabra base
bulbs. Bulbs included.
WARNING: Over lamping the fan
will result in the fan lights shutting
down until the proper wattage of
bulbs are installed.
Reset the lights by turning off,
r e p l a c e b u l b s w i t h t h e c o r r e c t
wattage bulbs, turn the power on.
40
Install the finial removed in step
35 to secure the bottom cage with
glass. Corresponding to step 41
to make sure pull chain align with
knurled grommet on light fixture,
and bottom cage.
7
38
Place glass over the threaded
rod and secure it by the screw
nut removed in step 35. Tigthen
securely.
41
Place pull chains through the
k n u r l e d g r o m m e t o n l i g h t
fixture, and bottom cage as
shown.
This side up
7/1/2013