Advertisement
II. BATTERY INSTALLATION
(Transmitter & Vehicle)
Requires 3 AA alkaline batteries for the vehicle and 3 AAA
alkaline batteries for the transmitter.
Vehicle
1. Use a screwdriver (not included) to unscrew the battery
door and remove the battery cover.
2. Install 3 new AA alkaline batteries with polarity (+/-) as
shown near to the battery cover.
3. Replace battery cover and tighten screw.
Transmitter
1. Use a screwdriver (not included) to unscrew the battery
door and remove the battery cover.
2. Install 3 new AAA alkaline batteries with polarity (+/-) as
shown inside the battery compartment.
3. Replace battery cover and tighten screw.
III. OPERATION
Infra-red LED in Transmitter needs to point towards
vehicle during play. If your vehicle doesn't respond when
the transmitter is activated, make sure the LEDs are
pointing at the vehicle.
Sound effects
1
Forward
2
Rotate
3
1
2
a
b
3 x AAA
3
Advertisement
