Mattel Tyco Turbo Pro Wheelie Cycle Owner's Manual

Mattel Tyco Turbo Pro Wheelie Cycle Owner's Manual

Radio control motorcycle

Advertisement

Quick Links

CAUTION:
Surfaces may become hot
and cause burns if electronics get wet. Do not
operate vehicle through water or snow.

GET STARTED!

Your Turbo Pro Wheelie Cycle™ is a high performance
motorcyle that allows you to pull off outrageous "one touch"
stunts like wheelies and Turbo boost action. Plus, your
Turbo Pro Wheelie Cycle™ has a specialized stabilizer that
that allows for maximum stability for your most radical
stunts.
1.GET SET!
Hold the Turbo Pro Wheelie Cycle™ off the ground and
rotate the right throttle control all the way.
*
Be sure to keep your fingers clear of the wheels at all
times.
2.LAUNCH IT!
Gently hand-launch your vehicle. Set it on the ground and
give it a gentle push while rotating the right throttle control.
I. CONTENTS/ FEATURES
• Turbo Pro Wheelie Cycle™ Vehicle
• TYCO ® R/C NiMH Charger
• TYCO ® R/C 9.6V d.c. NiMH Battery Pack
• 2 x AA Battery for controller
• Controller
• 2 x Skid Pad
VEHICLE
q Rider Figure (not removable)
w ON/OFF Switch
e Battery Latches
r Battery Compartment
TURBOTILT™ CONTROLLER
NOTE: Your Turbo Pro Wheelie Cycle™ uses a unique
controller with a sophisticated gravity switch to control
your steering. Just turn your vehicle ON. Then tilt the
Turbotilt™ controller to steer. Tilt the Turbotilt™ to the left
to turn left, Tilt right to turn right.
q Forward Control (throttle)
w Wheelie Button
e Turbo Button
r ON/OFF Switch
t Brakes
y Battery Compartment
u Antenna
i ON/OFF Light
Keep these instructions for
future reference as they
contain important information.
IMPORTANT: Please read
all "Consumer Information"
before operating your vehicle.
TYCO R/C SUPPORT
®
Questions or problems with your product?
DON'T RETURN IT TO THE STORE!
Just call us for help.
U.S. consumers may also register their products at this number.
1 888 557-TYCO (8926)
tycorc.com
CAUTION-ELECTRIC TOY:
8 YEARS OF AGE. AS WITH ALL ELECTRICAL PRODUCTS, PRECAUTIONS SHOULD BE
OBSERVED DURING HANDLING AND USE TO REDUCE THE RISK OF ELECTRIC SHOCK.
INPUT: 120VAC, 60Hz, 6W. OUTPUT: 11.2VDC, 230mA.
1
2
FRONT
5
8
1
2
3
8+
ASST. M0678
N1919/N1920-0920
NOT RECOMMENDED
FOR CHILDREN UNDER
A
B
4
3
C
BACK
7
6
4

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Tyco Turbo Pro Wheelie Cycle and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Mattel Tyco Turbo Pro Wheelie Cycle

  • Page 1 Keep these instructions for future reference as they contain important information. IMPORTANT: Please read all “Consumer Information” ASST. M0678 before operating your vehicle. N1919/N1920-0920 TYCO R/C SUPPORT ® Questions or problems with your product? DON’T RETURN IT TO THE STORE! Just call us for help.
  • Page 2 II. QUICK START Please read this Owner’s Manual thoroughly. 1.Start with a full charge. 2.Turn the vehicle and the transmitter switches to on. Rotate the Turbotilt™ forward “throttle” control to run and control your vehicle. 3.When you’re done driving, turn vehicle and transmitter ON/ OFF to the OFF position.
  • Page 3 V. BATTERY CHARGING/CARE Use only Tyco® R/C 9.6V NiMH battery packs. Other batteries may leak or rupture, causing personal injury and damage. 1. Plug the wall pack charger into a standard wall outlet. 2. Connect the wires leading from the battery pack to the wall pack charger connector.
  • Page 4 • Mattel Canada Inc., Mississauga, Ontario L5R 3W2. • Mattel U.K. Ltd., Vanwall Business Park, Maidenhead SL6 4UB. Helpline 01628500303. • Mattel Australia Pty., Ltd., Richmond, Victoria. 3121.Consumer Advisory Service - 1300 135 312. • Mattel East Asia Ltd., Room 1106, South Tower, World Finance Centre, Harbour City, Tsimshatsui, HK, China.

This manual is also suitable for:

M0678

Table of Contents