Maintenance - Rowenta OC7850 Manual

2 • Maintenance
2.1 • Changing the internal bulb
2.2 • Dismantling the door
*
depending on model
The upper element is foldable but not removable. Never use force to
manipulate the elements.
The interior of the oven has an enamelled floor and the walls have a
non-stick coating which can be cleaned easily with soapy water.
All the accessories can be cleaned with water containing a little
detergent.
The grilling racks, the tray
dish-washer.
To replace the bulb:
• unplug the oven and allow it to cool down for at least 1 hour,
• turn the porthole quarter of a circle anti-clockwise,
• clean the outside surface of the window using warm soapy water.
Dry it thoroughly,
• unscrew the bulb and replace (15W - 220/230V 300° C),
• Replace the window by rotating it through 90° in the clockwise
direction.
Open the door. Make sure that it is placed on a stable surface: turn your
oven by 90°.
Unscrew the 2 screw fixture at the door support links.
Remove the two flanges.
NOTE
When handling the window avoid any impact against the
glass pane. In the event of major impact against the glass pane, the
glass could break afterwards.
The inner glass must be lifted partly from below for a better grip. Slide
the glass towards the back of the oven to release it from the notches
which hold it in place.
Remove the inner glass and clean it u sing soapy water.
You then have access to the inner face of the external glass surface.
Then clean it.
*
and the glass panel
Replace the inner pane (check that the
markings are on the inner surface of the
door). Take care to position the glass
correctly: the rounded corners should be on
the lower side (near the door hinges). Fit the
upper corners into the notches (see arrows).
Replace the mounting flanges. Screw it back
loosely.
72
*
can be washed in the