Table of Contents
Advertisement
Characteristics of the pan base
The characteristics of the pan base may affect the uniformity of
the cooking results. Pans made from materials which help
diffuse heat, such as stainless steel sandwich pans, distribute
heat uniformly, saving time and energy.
Absence of pan or unsuitable size
If no pan is placed on the selected hotplate, or if it is made of
unsuitable material or is not the correct size, the power level
displayed on the hotplate indicator will flash. Place a suitable
pan on the hotplate to stop the flashing. If this takes more than
90 seconds, the hotplate will switch off automatically.
Empty pans or those with a thin base
Do not heat empty pans, nor use pans with a thin base. The
hob is equipped with an internal safety system. However, an
empty pan may heat up so quickly that the "automatic switch
off" function may not have time to react and the pan may reach
Getting to know your appliance
The instruction manual is the same for various different hobs.
An overview of the models with their dimensions is given on
page 2.
The control panel
Control panels
Main switch
%
Selecting the hotplate
Á
/
$
Programming zone
1
2
...8
9
û
û
û
Cleaning lock function
>
Childproof lock
D
Timer programming
0
Flexible zone
/
Ã
Ä
Powerboost Function
G
boost
The hotplates
Hotplate
Single hotplate
$
Flexible hotplate
û
Double hotplate
ð
Triple hotplate
ò
Only use pans suitable for induction cooking, see the "Appropriate cookware" section.
6
Turning on and off
Use a correctly sized pan.
See "flexible hotplate" section
The hotplate turns on automatically when a pan the same size as its outer area is placed on it.
The hotplate is switched on automatically by using a pan with a base that matches the size of the
outer area (
ð
or
ò
) selected for use.
very high temperatures. The base of the pan could melt and
damage the glass on the hob. In this case, do not touch the
pan and switch the hotplate off. If it fails to work after it has
cooled down, please contact the Technical Assistance Service.
Pan detection
Each hotplate has a minimum limit for detecting pans, which
varies depending on the material of the pan being used. You
should therefore use the hotplate that is most suitable for the
diameter of your pan.
Automatic detection on double or triple hotplates
These hotplates can detect cookware of different sizes.
Depending on the material and properties of the cookware, the
hotplate will adapt automatically, switching on part or all of the
hotplate and supplying sufficient power to obtain good cooking
results.
Indicators
Power levels
‚
-
Š
Functionality
‹
Time program function
‹‹
Residual heat
•
/
œ
Powerboost Function
›
Timer
U
Childproof lock
D
Cleaning lock
>
Automatic shut-off
r
Flexible zone
Ä
Control panels
Pressing a symbol activates its corresponding function.
Note: Always keep the control surfaces dry. Moisture can affect
proper working.
Advertisement
Table of Contents
