Sinclair AW-TDF190-H31 Installation And Operation Manual page 48

11 - MAINTENANCE
11.1 CHECKLIST FOR RECOMMENDED REGULAR CHECKS
Disconnect the power supply before each operation.
Checks effected on...........................................by...................................................................of the company............................................
Checking content
1 Air filter (inlet/outlet)
2 Anode
Inner storage tank
3
4 Electric heater
5 Saftey valve
If water doesn't flow freely when operating the handle, replace safety valve with a new one
6 Water filter
7 Expansion vessel
8 Checking for leaks*
*Refer to the local provisions for implementation; in an extremely brief and purely indicative manner, the regulation specifies the following.
Companies and technicians carrying out installation, maintenance/repair interventions, checks for losses and recovery operations must be CERTIFIED in
accordance with the local regulations.
The check for losses must be carried out an an annual basis.
Check the connection between power supply plug and socket and ground wiring regularly;
The missing or lacking maintenance of the magnesium anode, can lead to the corrosion of the storage tank with a subsequent loss of
water and the warranty coverage and the manufacturer responsibility fall.
It is recommended to clean the inner storage storage tank and e-heater to keep an efficient performance.
It is recommended to set a lower temperature to decrease the heat release, prevent scale and save energy if the outlet water volume
is sufficient.
Clean the air filter every month in case of any inefficiency on the heating performance.
Notes/interventions suggested to the owner
Checking frequency Action
Every month Clean the filter
Every 6 - 12 months Replace it if it has been used out
Every half year
Clean the
Every half year Clean the resistance
Every year Turn the knob
Every year Clean the filter
Every year Check charge
Every year Check
storage tank
48