Sinclair AW-TDF190-H31 Installation And Operation Manual page 41

10 - CONTROL
OFF
The display screen will automatically display different value at by different action.
It will display the last set temperature and icon SET ,if the action is ON, and will display - - - if the action is OFF.
ON
Set the water temperature of the setting timer.
Confirm and complete the timer.
Then repeat this process to set another timer.
3.2 - Cancel Timer (Scheduling)
Press
Enter timer setting.
Select timer ( ~ ) which needs to be cancel.
The timer icon will flash slowly if it is selected.
Confirm to cancel the timer
Then repeat selecting timer and cancelling. If the timer has not been set, when press button CANCEL
the display will show
After complete cancelling timer, press button CANCEL for 3sec to quit timer cancelling.
Check Timer (Scheduling)
Press
Enter timer checking.
Select time ( ~ ) which needs to be checked
The timer icon will flash slowly if it is selected, and the timer action (ON or OFF) and set clock will be shown.
If the action is ON, target temperature will be shown.
And if the action is OFF, icon - - will be shown.
Press button CANCEL for 3 sec. or no button pressing for 30 sec. to quit timer checking.
If there is confliction between Timer and Manually ON:
1. The moment of Manually ON has priority;
2. The moment of timer OFF has priority;
4 - Cancel
Press
To cancel setting, quit setting, clear alarm, ect....
To clear alarm buzzer, need to press for 1sec.
41