SPECIAL NOTES ON TOUCH PANEL
Permanent damage can occur if Sharp Edged, Pointed or Metal items are used to activate Touch.
This could invalidate any remaining warranty.
We recommend to use a plastic stylus (tip R0.8 or over) or fi nger.
WALL MOUNTING
WARNING
W h e n y o u u s e w i t h t h e w a l l m o u n t i n g , i n
consideration of thickness of the mounting stage,
tighten the M4 Screw with washer which "L" length
is 8mm to fasten the monitor. Using the screw
longer than this may cause electric shock or
damage because it may contact with the electrical
parts inside the monitor.
BUILT-IN EQUIPMENT
WARNING
This product is not designed for the purpose of being used in high temperature
environment.
If the product is placed in an external cabinet, you need to design cooling fans
and vents to keep the temperature low enough to fit in the product temperature
specifi cation.
Screw
Mounting Stage
L
BEFORE YOU OPERATE THE MONITOR 5
Chassis