Physical Interface; Led Indicator - TP-Link TPL-WPA4220 User Manual

1.3 Physical Interface

There are four physical items on this device.
Item
Wi-Fi/Wi-Fi Press the button for 2 seconds to start Wi-Fi Clone.
Clone Button Press the button for 5 seconds to enable or disable the wireless function.
Ethernet Port Two 10/100Mbps Ethernet port connected to PC LAN card or broadband device.
Reset Button Press the button for about 5 seconds, the device will restore to its factory defaults.
Press the button for 1 second to start the pairing process.
Pair Button
Press and hold the button for 10 seconds to leave the powerline network.

Note:
For detailed information about the Reset button and Pair button, please refer to
and Reset Button.

1.4 LED Indicator

The LED indicator displays information about the device's status.
TL-WPA4220 AV600 Powerline Wi-Fi Extender
Description
2
Wi-Fi/Wi-Fi Clone Button
Ethernet Port
Pair Button
Reset Button
Chapter 5 Pair Button